Swing Gate ประตูผลักแบบสวิง รุ่น CA-SW02
รายละเอียดสินค้า
GS ADA Swing Gate was specifically designed for persons with disabilities. It has an innovative design to enable quicker and easier passage and to fit into tight spaces. Its cabinet was designed to withstand the impact of wheel chairs and carts. It can be for one-way and two-way, pedestrian traffic control. Operation in either a 1 x 90° or 2 x 90° bi-directional mode. These gates are also used to complement our turnstile and optical turnstiles especially where passage of larger items is required.With an opening of up to 900mm, items such as wheelchairs, trolleys and oversized packages are easily accommodated.
Housing
The main body of the housing is constructed from a 168 mm diameter polished stainless steel tube with a brushed finish. A mounting flange is attached to the base, providing a suitable means of bolting the column to a finished floor surface. The drive unit is concealed and mounted within
the main body of the housing which has a removable panel located in its lower portion. The rotating section of the column has 2 fixed flanges as a provision for the gate wing attachment.These flanges allow for the fixing of the standard gate wing as well as specially designed and customised gate wings.
Functions
The horizontal bi - diirecttiional movement of the arm allows patrons to pass smoothly through the ADA swing gates
Breakdown Self-checking and alarm indication, easy for maintenance and using
Anti illegal entering alarm
Anti-nipping Function
The motor will stop working in case of the swing encounter of obstrust
The swing gate arm will lock in case of not receving the open signal
Single/Double Directional Optional which can be controlled by both ways or single way
Standard electrical interface, various card reader acceptal to our turnstiles & can be controlled by computer
Reliable and durable, low noise and stable operation
Technical Spec.
Voltages: AC220±10%V,50HZ
Power Consumption: DC24V
Product Dimension: Φ168*985mm
Working Temperature: -15OC - 70 OC
Input Interface: Dry Contact Signal
Lane Width Maximum: 800mm
Opening/Closing Time: 1.5 Second
Driving Mechanism
The wings are moved by mechanical arms. The arms are rotated by a torque shaft connected to the drive unit. The drive unit is a DC motor working in conjunction with a bi-directional encoder. A microprocessor control system guarantees the precise movement and positioning of the wings.
Method of Operation
ON receiving a signal from the access control system, or push button, the wings open.
Power Failure: In the event of a power failure the wings will automatically open for exit freely.
Fire Alarm: Input facility is available for voltage free contact supplied by others to effect fail state.
Interface: Potential free contact provided by either card reader or pushbutton input. Card reader inhibit and reset outputs signals are available as standard.
Swing Gate ประตูผลักแบบสวิง ประตูกั้นทางเข้า-ออก เครื่องกั้นทาง
Swing Gate: CA-SW01 | Swing Gate: CA-SW02 | Swing Gate: CA-SW03 |
Swing Gate: CA-SW04 |
Swing Gate ประตูผลักแบบสวิง รุ่น CA-SW01
รายละเอียดสินค้า
1. Stainless steel case, with nice shape and solid structure
2. Water-proof, sun block, high temperature resistance and cold resistance
3. Indicate passage status, and provide directional guide
4. Can program the control status of turnstile, select multiple working modes, and set uni-directional or bi-directional controlling
5. Compatible with reader and writers of IC card, ID card, Magnetic card, bar code card and etc.
6. can setup the moving condition through the built-in small key press on the main controller.
7. Dual Anti-pinch function (mechanism & induction): when the telescopic boom is blocked during its resetting, it will automatically stop in due time, and will reset after the default delay ( until reset successfully), and the strength is small (<_kgs).
8. Anti strike function: when the arm does not get the signals for open, it will lock tightly.
9. It has automatically reset function, when the turnstile open, the passengers should access in certain time, or the system will cancel their authority.
10. it can adjust normal open or normal close to meet different requirements.
11. It can support many kinds of card readers, receive the relay switch signals to work.
12. single/double swing function, can control people entrance/exit in single or double way.
13. It can remote control and manage on computer, automatically reset in delay time.
14. The arm will open when the power is off, will close when the power is on, can meet security requirement.
Functions & Features:
- Arm length: 500-900mm
- The strength the arm can bear: 30kg
- The moving angel: 180 degree
- Moving direction: bi-directional
- Working power: AC220 ±10%V/50 ±10%HZ (AC110V available)
- Driver engine: Driving electric motor: DC motor 30W/24V.
- Input interface: pulse signal 12V, ≥100ms, driver electronic current ≥10mA
- Communication interface: RS485
- Access speed: 40 people per minute (normal open), 25-30 people per minute (normal close).
- The time of open/close: 2-3s
- The time of electronic get through to working condition: 3s
- The resetting time: 10s
- Working temperature: -15-+75 degree
- Relative humidity: ≤95%, no drew.
- Structure: frame construction/ 304 grade stainless steel case (thickness: 1.5mm); water-proof, sun block, high temperature resistance and cold resistance
- Dimension: 350x280x990mm
- Width of passage: ≤900mm (single piece of turnstile)
- Passage mode: single-way or double-way
- Reading mode: compatible with reader and writers of IC card, ID card, Magnetic card, bar code card and etc.
- Working environment: indoor or out door (under overcast shelf)
Swing Gate ประตูผลักแบบสวิง ประตูกั้นทางเข้า-ออก เครื่องกั้นทาง
Swing Gate: CA-SW01 | Swing Gate: CA-SW02 | Swing Gate: CA-SW03 |
Swing Gate: CA-SW04 |
Swing Gate ประตูผลักแบบสวิง รุ่น CA-SW04
รายละเอียดสินค้า
1. Fault detection and alarm functions, easy to use and maintenance.
2. The running status can be programmed and controlled with the built-in keyboard on the main board.
3. Mechanical antipinch function. If the gate meets resistance in the reset process, motors will stop working automatically within the prescribed time and reset again after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically until opening signal received
5. Synchronization functions (for dual gate equipments).
6. Automatic reset function. Should the user fail to pass within the prescribed time (default time is 5 seconds), the system will cancel the authority of the current user automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers, bar codes, fingerprints, etc. (Access controller needed)
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on, complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function (optional).
Swing Gate ประตูผลักแบบสวิง ประตูกั้นทางเข้า-ออก เครื่องกั้นทาง
Swing Gate: CA-SW01 | Swing Gate: CA-SW02 | Swing Gate: CA-SW03 |
Swing Gate: CA-SW04 |
Swing Gate ประตูผลักแบบสวิง รุ่น CA-SW03
รายละเอียดสินค้า
Overall Dimension |
1450*200*1100mm |
Weight |
35kg/pcs |
Swing Arm Length |
≤700mm |
Housing Material |
SUS(304#),thickness is no less than 1.5mm |
Working Voltage |
AC220V±10%,50HZ±10% |
Drive Motor |
DC brushed motors(24V) |
Passage Width |
≤1500mm |
MCBF |
3,000,000 cycle |
Communication Interface |
TCP/IP |
Passing Speed |
40~50 people/min |
Readable Cards |
IC/ID card |
Operating Time |
1s |
Protection Grade |
IP54 |
Working Environment |
Indoor; Outdoor (with shelter) |
Working Temperature |
-40°C~60°C |
Relative Humility |
≤95%, no-condensation
|
1.Technology Parameters
- Framework: 2.0 &1.0mm thickness of 304 stainless steel shell
- Framework size:
- Main body:260*150*1150 The diameter of the pole:168mm
- The diameter of added pillar:89mm
- Lampshades, lights are intalled on the mainbody, which makes the mainbody more
- beautiful
- The length of the swing arm: 500mm-830mm
- Net Weight: 70Kg
- The largest force the swing arm can surport: 30Kg
- Swing arm running angle: 90degree
- Swing direction: Single or bi-direction
- Working power: AC220 ±10%V/50 ±10%HZ
- Driving eletricmotor: DC eletricmotor 200w/24v
- Input interface: dry contact signal or +12V signal or impulse signal of more than 100ms
- DC12V Driving current: > 10mA
- Communication interface: RS485 standard Distance less than 1200metres
- Transit speed: 40 persons/min(open often), 25-30 persons/min(close often)
- Time for opening or closeing: 2-3seconds
- Starting time after power is on: 3 secconds
- Automatic reset time after fault: 10seconds
- Working environment:
- Indoor, outdoor(with a tent over)
- Temperature: 10 degree centigrade below to 50 degree centigrade
- Relative humidity: ≤90% never coagulated
2.Main function and characteristics
- With function of self-examine and alarm,it is convenient for maintainance and use.
- Being able to program operation status by the SET keyboard in the main board.
- The mechanism is locked until a valid open signal is received.
- Automatically reset function: It will automatically lock if the pedestrian hasn’t pass through
- the channel in the pre-set time after the opening. The passing time is adjustable.
- Unit can be adjusted permanent open or close when power off to meet different needs.
- The swing barrier gate automatically open when power off and automatically close when power on
3.Main structure and allocation
- Main body 2
- Pole 2
- Baluster 4
- Controller 2
- Transformer 2
Swing Gate ประตูผลักแบบสวิง ประตูกั้นทางเข้า-ออก เครื่องกั้นทาง
Swing Gate: CA-SW01 | Swing Gate: CA-SW02 | Swing Gate: CA-SW03 |
Swing Gate: CA-SW04 |